DLA-X9



 

Full HD D-ILA Front Projector with 3D Viewing

DLA-X9

Full HD D-ILA front projector with 100,000:1 native contrast ratio, three D-ILA devices, and 2x motorized zoom lens with motorized focus.

This projector features 3D viewing, Real Color Imaging Technology, Adobe RGB color space, New Color Management with 7-axis Matrix, New Clear Motion Drive, JVC's original Film Tone adjustment, New Screen Adjustment Modes, Dark/Light Correction, flexible set-up and more

Firmware Update Procedure(.pdf)
(This update addresses CEC Operation, HDMI compatibility, a Lens-shift direction of the ceiling mode, smoothness of the Color management adjustment, and improve the 2D to 3D (and 3D to 2D) mode switching)
Firmware Update(.zip)

DLA-X9

Features

  • Three 0.7" Full HD D-ILA devices
  • Input signal capability: 1080p
  • True full HD resolution: 1920 x 1080
  • 220W Ultra High-pressure Mercury Lamp (lamp life: approx. 3000 hours when the lamp is in Normal mode)
  • Projection Size: 60-inch to 200-inch
  • Projection Distance: 3.01m to 6.13m (100-inch)
  • Terminals: RS232C x 1, HDMI x 2 (v.1.4a), Component x 1, PC x 1, Trigger x 1, 3D sync x 1, LAN x 1, Remote x 1
  • Exceptional 100,000:1 native contrast ratio* realized by the combination of enhanced full HD D-ILA devices and new optical engine to deliver cinema-like quality
  • 3D stereoscopic viewing on D-ILA projection employing a Frame Sequential 3D method. Optional 3D Glasses (PK-AG1-B) and 3D Sync-emitter (PK-EM1) are required for viewing.
  • Exclusive Real Color Imaging Technology with Xenon lamp color temperature setting bring out the colors in original film prints
  • New color filter creates a wider color reproduction spectrum including Adobe RGB color space
  • New Color Management System with 7-axis Matrix
  • Original Film Tone Adjustment balances gamma, contrast and brightness settings without affecting the gray scaling
  • New Screen Adjustment Modes; an optimal parameter can be selected from a set of 99 parameters
  • Darkness and Lightness Correction
  • New Clear Motion Drive
  • Automatic lens cover
  • Two HDMI standard (Ver.1.4a) terminals with 1080/24 input and Deep Color
  • Flexible installation guaranteed with +/-80% vertical and +/-34% horizontal powered lens-shift function
  • High-performance 2x zoom lens with motorized focus
  • Quiet operation: only 20dB

Technical Specifications

Display device: Full HD D-ILA device
Panel size: 0.7-inch D-ILA x3
Resolution: 1,920 x 1,080 pixels
Lens: 2 x motorized zoom / focus lens
f=21.4 - 42.8mm
F=3.2-4.3
Projection size: 60 inches to 200 inches
Lens shift function: +/-80% vertical and +/-34% horizontal (motorized)
Light source lamp: 220W Ultra High-pressure Mercury Lamp (lamp life: approx. 3000 hours when the lamp is in Normal mode)
Light output 1300 lm
Contrast ratio: Native: 100,000:1
Video input terminals (back panel): HDMI: 2 (ver.1.4a, 3D, Deep Color CEC compatible)
Component: 1 (RCA)
PC: 1 (D-sub 15-pin)
Output terminals (back panel): Trigger: 1 (mini jack, DC12V, 100mA)
3D sync: 1 (mini DIN 3-pin)
Control terminals: RS-232: 1 (D-sub9 pin)
Remote: 1 (mini jack)
Video input signals: Digital: 480i/p, 576i/p, 720p 60/50, 1080i 60/50, 1080p 60/50/24
Analogue: 480i/p, 576i/p, 720p 60/50, 1080i 60/50
PC input signal: Digital: VGA, SVGA, XGA, WXGA, WXGA+, SXGA, WSXGA+, WUXGA
Analogue: VGA, SVGA, XGA, WXGA, WXGA+, SXGA, SXGA+, WSXGA+, 1920 x 1080, MAC 13", 16", 19"
Noise level: 20dB (in Normal mode)
Power requirement: AC 110V-240V, 50/60 Hz
Power consumption: 350W (Stand-by: 0.9W)
Dimensions (WxHxD): 455 x 179 x 472 mm
Weight: 15.1 kg